• Dr.R.Ranjit Kumar
• C.SaiKeerthana
• I.Madhavi
• D.Suneetha
• M.UmaBharathi, N.Swetha

A compact Two-port multi-input, multi-output (MIMO) antenna with good isolation is proposed for sub-6 GHz and Internet of Things (IOT) applications. The wideband characteristics and the required frequency band are achieved through the Fractal-shaped structure and with proper placement of the slots on the resonator. The proposed antenna consists of a dual fractal patch etched on jeans substrate with 50Ω feed line. The proposed antenna has a dimension of 30 × 20 × 1.6 mm3.The impedance bandwidth obtained by the proposed antenna is about 94% between the frequency range of 3.1 GHz to 7.25 GHz, thus providing a wideband antenna characteristic covering sub-6 GHz 5G bands (from 3.4 to 3.6 GHz and 4.8 to 5 GHz), the WLAN band (5.2 GHz), and ISM band (5.8 GHz), respectively. The interconnected ground plane provides good isolation of less than -20 dB between the ports, and the maximum gain is 3.9 dBi. As the proposed design is compact and low profile, this antenna could be a suitable candidate for 5G and IoT Wireless Applications

DESIGN AND FABRICATION OF A COMPACT WIDEBAND MONOPOLE ANTENNA FOR 5G WIRELESS APPLICATIONS

"DESIGN AND FABRICATION OF A COMPACT WIDEBAND MONOPOLE ANTENNA FOR 5G WIRELESS APPLICATIONS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 5, page no.c32-c38, May-2024, Available :http://www.jetir.org/papers/JETIR2405205.pdf

"DESIGN AND FABRICATION OF A COMPACT WIDEBAND MONOPOLE ANTENNA FOR 5G WIRELESS APPLICATIONS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 5, page no. ppc32-c38, May-2024, Available at : http://www.jetir.org/papers/JETIR2405205.pdf