• MIDDE NAGA MAHESH
• Dr. T.SREENIVASULU REDDY

A new method for increasing the effectiveness of flash ADC devices is the Threshold Inverter Quantizer (TIQ). This is accomplished by doing away with the need for a resistive or capacitive voltage divider circuit, a set of differential comparators, and reference voltage generator. Instead, it uses a Complementary Metal Oxide Semiconductor (CMOS) inverters are used to produce the internal reference comparator array. Significant enhancements in power consumption, silicon area, and operating speed are achieved by using the inverters threshold voltage referred as the reference voltage. However, the inverter threshold voltages sensitivity for changes in operating temperature and process conditions calls for a compensation strategy. This study introduces a TIQ-based flash ADC that incorporates voltage adjustment for the inverter threshold. The project's aim is to create adding a mux-based encoder that uses transmission gate logic and modifying the TIQ comparator using power gating, a 5-bit flash ADC is achieved. The design and simulation of this system are performed using TANNER EDA in a 180nm technology process.

Mux based encoder, TIQ comparator, Power gating

"DEVELOPMENT OF AN ENERGY EFFICIENT TIQ FLASH ADC USING TANNER EDA TOOL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 6, page no.b623-b631, June-2024, Available :http://www.jetir.org/papers/JETIR2406169.pdf

"DEVELOPMENT OF AN ENERGY EFFICIENT TIQ FLASH ADC USING TANNER EDA TOOL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 6, page no. ppb623-b631, June-2024, Available at : http://www.jetir.org/papers/JETIR2406169.pdf