• Rohit Dhanaji Maske
• Niraj Shailesh Jagtap
• Vivek Sudhakar Khirodkar
• Saurabh Jaykumar Metkari
• Nilesh Jawarkar

A sampling method of gathering representative data from a group. For example, a manufacturer might check only 2 or 3 gears from a batch of 100 gears. Due to which the whole lot gets rejected if any gear in between has error in it. Thus, we need to check each and every gear in the batch but manually this process is time consuming. In our project we are designing and manufacturing a system which will be checking every gear. We use a conveyor belt for movement of gear, a camera for capturing and checking the gear parametersfor its error by comparing the parameters stored at the back end. If the parameters are matched with the stored parameters then it goes to the accepted lot otherwise with the help of shooting gun it goes to the rejected lot.

: Image Processing, Gear Measurement, Gear Tooth Analysis.

"Development of an Advanced Gear Measurement System through Image Processing Technique.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 6, page no.d254-d256, June-2024, Available :http://www.jetir.org/papers/JETIR2406330.pdf

"Development of an Advanced Gear Measurement System through Image Processing Technique.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 6, page no. ppd254-d256, June-2024, Available at : http://www.jetir.org/papers/JETIR2406330.pdf