• PALLA RAGHUNANDAN
• B.KRISHNA NAIK

In building structures wind is critical load and needs to be considered for safety and serviceability of structures. As we construct high rise buildings wind force acting on the surface of the structure increases. As we go higher, wind excitation becomes one of the most precarious forces acting on the surface of the structure and if the plan geometry is irregular, it can induce torsion. This can be life-threatening to the structure, so it is essential to analyse and understand such forces during designing. That analysed design work is very useful for further study of wind. So as per the provision of Indian standards IS875:2015(part3) wind load is considered under different terrain categories. The structural results of analysis are used to verify the structure fitness for use. Computer software’s are also being used for the calculation of forces, bending moment, stress, strain &deformation or deflection for a complex structural system. STAAD. Pro is one of the leading software’s for the design of structures. In this project we considered a G+5 structure in STAAD pro. The structure is analysed as per Indian standards. The main objective of this project is to compare the variations of lateral displacement, maximum bending moment, maximum shear force and maximum deflection of the same structure in different terrain categories.

Wind Load, Terrain, Multi storey building, Design Analysis and STAAD.Pro

"ANALYSIS ON IMPACT OF WIND LOAD ON MULTI STOREY (G+5) BUILDING IN DIFFERENT TERRAIN CATEGEORIES BY USING STAAD.PRO", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 11, page no.c527-c531, November-2024, Available :http://www.jetir.org/papers/JETIR2411269.pdf

"ANALYSIS ON IMPACT OF WIND LOAD ON MULTI STOREY (G+5) BUILDING IN DIFFERENT TERRAIN CATEGEORIES BY USING STAAD.PRO", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 11, page no. ppc527-c531, November-2024, Available at : http://www.jetir.org/papers/JETIR2411269.pdf