• Vishal Karsan Gadhvi
• Dr. Vijaykumar. B. Gadhavi

Distributed (DG) generation units are increasingly relevant now in the electrical transmission network. The goal of the optimal transmission network DG unit allocation is to have the best locations within the network. There has been an effort to monitor the most sensitive buses in the transmission network for voltage collapse. A procedure was provided here to use the PSAT toolbox in Matlab to allocate DG units on the regular IEEE 30 Bus System. The approach is based upon an examination of the continuity of electric current flow and the assessment of the most sensitive buses in the test system for voltage failure. The proposed approach shows considerable lowering of actual and reactive energy losses, improved voltage profiles and increased transmission network loading capabilities.

DG Technologies available, Placement algorithm, Effect of DG Unit Placement, Case Survey on the IEEE 30 Bus Test System, PSAT toolbox in Matlab Conclusion, comparison of data with and without DG.

"Hybrid Distributed Generation Allocation on IEEE 30 Bus Test System to find out the losses and maximum loading in Transmission Network ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.12, Issue 1, page no.h692-h698, January 2025, Available :http://www.jetir.org/papers/JETIR2501769.pdf

"Hybrid Distributed Generation Allocation on IEEE 30 Bus Test System to find out the losses and maximum loading in Transmission Network ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.12, Issue 1, page no. pph692-h698, January 2025, Available at : http://www.jetir.org/papers/JETIR2501769.pdf