• JAYANT RAJESH MIRAJKAR
• DR.U.S.PATIL

The MIG welding parameters are the most important factors affecting welding quality, productivity, and cost. This study discusses the effects of welding parameters on the weld strength and weld pool shape of medium carbon steel throughout the welding process, including welding current, welding voltage, gas flow rate, wire feed rate, etc. The DOE method makes it possible to optimize parameters and find the best combination of parameters to achieve the required quality. Automotive Industry heavy trucks, Aerospace and Shipbuilding structural elements, Oil & Gas and Transportation containers. The Efficiency of welded joints in MIG depends on numerous input process parameters such as welding current, welding voltage, gas flow rate, torch angle, electrode feed rate etc. Wrong selection of these process parameters will lead to bad quality welds. So there is a need to control the process parameters to obtain good quality welded joints. In order to verify its efficacy in the study of weld strength and penetration depth, conformation tests have finally been conducted to compare the calculated values with the experimental results.

"A Review On Experimental Analysis of MIG Welding Parameters of Dissimilar Metal SS304 and AA6063 Weld Joint by using RSM Method", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.12, Issue 7, page no.d297-d302, July-2025, Available :http://www.jetir.org/papers/JETIR2507334.pdf

"A Review On Experimental Analysis of MIG Welding Parameters of Dissimilar Metal SS304 and AA6063 Weld Joint by using RSM Method", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.12, Issue 7, page no. ppd297-d302, July-2025, Available at : http://www.jetir.org/papers/JETIR2507334.pdf