UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 10 | October 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 5 Issue 9
September-2018
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRA006344


Registration ID:
189197

Page Number

137-143

Share This Article


Jetir RMS

Title

DESIGN AND DEVELOPMENT OF BRAKE CYLINDER FRONT AXLE USING SINGLE OPERATION DIE

Abstract

The aim of the project is to design a brake cylinder front axle, a component which is used in heavy trucks. The involves to calculate the force required for the manufacturing process by using ‘Hydraulic press’. For this process, Extra Deep Drawing cold rolled (EDD-CR-4) material is used. CR-4 is preferred for drawing operation and it possesses high ductility. Extra deep drawing steel is used to achieve a very low carbon content. In this manufacturing process, the involved operations are blanking, cutting, drawing, trimming, punching, folding, coining etc.,. Hydraulic press is a device which uses a hydraulic cylinder to generate compressive forces. Hydraulic cylinder works as a mechanical actuator which is used to give a unidirectional force through a unidirectional stroke. Hydraulic press works on Pascal’s principle, i.e., the pressure through out in a closed system is constant. Some of the applications of hydraulic press are: • Deep drawing operation • Blanking and punching operation • Metal forming operation In the hydraulic press, the single operation die is used. In this simple dies or single action dies can perform single operation for a single stroke of the press slide. The operation may be forming or cutting. The brake cylinder front and rare axle parts are employed in heavy duty vehicles eg. Bulldozers, heavy trucks

Key Words

DESIGN AND DEVELOPMENT OF BRAKE CYLINDER FRONT AXLE USING SINGLE OPERATION DIE

Cite This Article

"DESIGN AND DEVELOPMENT OF BRAKE CYLINDER FRONT AXLE USING SINGLE OPERATION DIE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 9, page no.137-143, September-2018, Available :http://www.jetir.org/papers/JETIRA006344.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"DESIGN AND DEVELOPMENT OF BRAKE CYLINDER FRONT AXLE USING SINGLE OPERATION DIE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 9, page no. pp137-143, September-2018, Available at : http://www.jetir.org/papers/JETIRA006344.pdf

Publication Details

Published Paper ID: JETIRA006344
Registration ID: 189197
Published In: Volume 5 | Issue 9 | Year September-2018
DOI (Digital Object Identifier):
Page No: 137-143
Country: --, -, - .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003020

Print This Page

Current Call For Paper

Jetir RMS