• Katre Pankaj A
• Kare Rohan
• Khot Mahesh A
• Talape Atul
• Chandgude Swapnil

The Kinetic Energy Recovery System (KERS) is a technology used in Formula-1 cars to recover the energy lost in car braking, thereby increasing vehicle motion. The same concept, regenerative braking, can be applied to bicycles that use a flywheel mounted between the bicycle frames. The flywheel can store braking energy by rotation, and this energy can be returned to the system, which reduces the required pedaling. Open the bicycle. The flywheel energy storage (FES) system uses a flywheel with a suitable clutch mechanism and a sprocket and chain. The project provides information on basic system design and modifications made on bicycles and on bicycles to apply KERS to bicycles. The project also summarizes the efficiency and pedaling of flywheel bicycles.

Kinetic Energy, flywheel, bicycles, clutch.

"DESIGN & ANALYSIS OF KINETIC ENERGY RECOVERY SYSTEM (KERS) IN BICYCLE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.455-460, March-2019, Available :http://www.jetir.org/papers/JETIRAH06079.pdf

"DESIGN & ANALYSIS OF KINETIC ENERGY RECOVERY SYSTEM (KERS) IN BICYCLE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp455-460, March-2019, Available at : http://www.jetir.org/papers/JETIRAH06079.pdf