• Ramu V Aital

Designing high quality products and processes at a low cost is an economic and technical challenge to an engineer a systematic and efficient way to meet this challenge is the parameter design method of design optimization for the performance, quality and cost. The parameter design method uses a mathematical tool called orthogonal array and a measure of quality called signal-to-noise (S/N ratio). In this project Warpage control in washers of thrust bearing using Taguchi robust design Methodology an attempt has been made to control the using parameter design.Parameter design is an approach for design of experiments (DOE) which enables one to identify the nature and effect of parameter(s) by conducting minimum number of experiments using orthogonal arrays, allows the effect of process parameters to be determined efficiently, effect of various process parameters are determined by ANOVA analysis. The estimation of the process parameter’s effect is then used to optimize process parameter.

WARPAGE CONTROL IN WASHERS OF THRUST BEARING USING TAGUCHI ROBUST DESIGN METHODOLOGY

"WARPAGE CONTROL IN WASHERS OF THRUST BEARING USING TAGUCHI ROBUST DESIGN METHODOLOGY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.100-105, March-2019, Available :http://www.jetir.org/papers/JETIRAL06023.pdf

"WARPAGE CONTROL IN WASHERS OF THRUST BEARING USING TAGUCHI ROBUST DESIGN METHODOLOGY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp100-105, March-2019, Available at : http://www.jetir.org/papers/JETIRAL06023.pdf