UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 4
April-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRBB06076


Registration ID:
204844

Page Number

368-373

Share This Article


Jetir RMS

Title

Optimization of laser cutting parameters for 316L

Abstract

Optimization of the CO2 laser cutting parameters for attainment of high cut edge quality in 15 mm stainless steel plate was demonstrated in this study. The tested process parameters included cutting speed, laser power, gas pressure. Optimization of these process parameters enhances the melt removal from the cut kerf so as to prevent the undesired dross adherence on the lower cut edge or even incomplete penetration of the workpiece when the incident intensity is not sufficient to penetrate the workpiece. Dross-free cut edges with lower surface roughness and lower deviation of cut edge squareness could be achieved by reducing the cutting speed from the maximum achievable value. These conditions enhance a high melt removal rate resulting in a high cut edge quality.

Key Words

Cite This Article

"Optimization of laser cutting parameters for 316L", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.368-373, April-2019, Available :http://www.jetir.org/papers/JETIRBB06076.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Optimization of laser cutting parameters for 316L", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp368-373, April-2019, Available at : http://www.jetir.org/papers/JETIRBB06076.pdf

Publication Details

Published Paper ID: JETIRBB06076
Registration ID: 204844
Published In: Volume 6 | Issue 4 | Year April-2019
DOI (Digital Object Identifier):
Page No: 368-373
Country: 11111111, aaa, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002933

Print This Page

Current Call For Paper

Jetir RMS