• Saksham Bahety
• Yogesh Rathi
• Vipul Gandhi
• Darshak Pawar
• Prof.S.M.Alage

The main aim of this project is to design a new die with interchangeable punches also reduce the weight of material by means of changing the material of die set. Now a days sheet metal working processes are widely used in almost all industries like automotive, defence, mechanical industries. Also sheet metal working processes are predominantly used as various reasons not only for industrial purpose but also utilised for commercial purpose as well. For that many people are working in developing the new trends using their innovative ideas. Especially in die design, many die sets are made for different functions such as progressive die, compound die etc. This project is also based on new design of die punch. The main aim of this project is to design a new die with interchangeable punches also reduce the weight of material by means of changing the material of die set. The project mainly focuses on different operations done on single die set in a single stroke of press, presently these operations are done separately in five steps which includes four drills and one plasma cutting. These operations are leading to reduce the production rate and increasing the cycle time with cost as well. As per our new die set, this should constantly eliminating the loss in the production time and reduce the man power for loading and unloading of work piece. The parts of die sets, punch and die are designed and assembled in the Ansys Workbench Parametric.

"“Designing and Manufacturing of Die for Rm-800 Oil Tank Cover”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.799-804, April-2019, Available :http://www.jetir.org/papers/JETIRBB06154.pdf

"“Designing and Manufacturing of Die for Rm-800 Oil Tank Cover”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp799-804, April-2019, Available at : http://www.jetir.org/papers/JETIRBB06154.pdf