• Kaushik Katti
• Sanket Gangawane
• Pratik Urde
• Ashish Shinde
• Sudarshan.D.Martande

Since time immemorial, the main source of energy has been coal, oil, natural gas, nuclearenergy, wood and coal. However, all these sources are limited and are the main cause ofpollution and this has led to development and more focus on sustainable energy supply withminimum pollution effects. Hence research and analysis has shown that wind energy, solarenergy and biomass are the most prominent solutions to the above problems because they areeco-friendly and readily available in nature. Wind energy can be generated using windmills that provide mechanical energy that is useddirectly on machinery e.g. water pump and grinder; or wind turbines that provide electricalenergy. The main objective of our project was to design a windmill . Windmills are classified into two main types based on the axis about which they rotate. Horizontalaxis has the main rotor shaft running horizontally and if the rotor must be oriented inthe direction of the wind, a wind vane is coupled with a servomotor. Vertical axis has the mainrotor shaft running vertically.

"Lifting of Water by Wind Energy", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.958-961, April-2019, Available :http://www.jetir.org/papers/JETIRBB06182.pdf

"Lifting of Water by Wind Energy", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp958-961, April-2019, Available at : http://www.jetir.org/papers/JETIRBB06182.pdf