• Vikram Gaikwad
• Deepanshu Agrawal
• Akash Gaikwad
• Parag Gaikwad
• Pravin Lokhande

Dynamometers are generally not portable devices, since these cannot be used in more than one operation station. Another factor that is the cooling system used in dynamometers is complex. The dynamometers are generally liquid cooled, which prone the design towards more complicated and sturdier. This makes the device costlier and more complicated in design. In this project, the dynamometer used is air cooled type eddy current dynamometer. Hence the conventional liquid cooling system is replaced by air cooling. Another main factor which is advantageous is that air cooled dynamometer is lighter than any others. This makes it a portable device. Therefore, the design is simpler and device is portable, hence it can serve the purpose of working on multiple work stations. The construction of the system and interaction of component of the dynamometer was also considered which were done

"Design and Validation of Air-cooled Eddy Current Dynamometer Test Rig", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.989-994, April-2019, Available :http://www.jetir.org/papers/JETIRBB06189.pdf

"Design and Validation of Air-cooled Eddy Current Dynamometer Test Rig", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp989-994, April-2019, Available at : http://www.jetir.org/papers/JETIRBB06189.pdf