UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 4
April-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRBG06018


Registration ID:
207560

Page Number

130-136

Share This Article


Jetir RMS

Title

FABRICATION OF MICRO ELECTRIC BIKE

Abstract

The availability of fossil fuels such as Petrol, Diesel and LPG are decreasing day by day and their cost is increasing. Moreover the pollution by the IC engines causing health hazards, rising of ocean levels and natural calamities. There is an urgent need some alternative to IC engines to stop the consequences due to pollution. In this project it is intended to convert an existing bike into electric vehicle. To do this an old china made vehicle is collected from old garage and is modified to fix 250 watt electric motor and batteries. Four cells of each 12 V were chosen and are producing total 48 V. The engine position is replaced by the electric batteries. The control unit is housed under the seat and the charging socket is placed in the tank. Finally the electric driven vehicle is prepared. The vehicle is taking 2 hours of time for full charging of the battery and is consuming nearly 2KWH of electric energy. The full charging battery is giving a range of 40 km. It is found that the bike is giving a range of 40km with 14 rupees of expenditure. The total project incurred an expenditure of Rs. 25,000/-.

Key Words

Micro bike, E-bike, Trekking bike, Orange bike, Plug-in electric bike.

Cite This Article

"FABRICATION OF MICRO ELECTRIC BIKE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.130-136, April-2019, Available :http://www.jetir.org/papers/JETIRBG06018.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"FABRICATION OF MICRO ELECTRIC BIKE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp130-136, April-2019, Available at : http://www.jetir.org/papers/JETIRBG06018.pdf

Publication Details

Published Paper ID: JETIRBG06018
Registration ID: 207560
Published In: Volume 6 | Issue 4 | Year April-2019
DOI (Digital Object Identifier):
Page No: 130-136
Country: KAKINADA, Andhra Pradesh, -India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002986

Print This Page

Current Call For Paper

Jetir RMS