• prof.Lakshmikant Bopche
• saurabh Bele
• shubham Jarile
• palash Janwe
• harshal Chandpukar

In normal way all the industrials or electrical machineries are controlled by the manual operation. Hence there is step by step progress but most of the time there is not actual instant co-operation between the system and the operator in case of fault type situation .Therefore, we are designing a system, where there exits communication between the system and operator. For this we are using 1kva,3phase transformer, microcontroller. As we know about distribution transformer is a major component of power systems and it is correct functioning vital to system operation. To reduce the risk of unexpected failure, real time monitoring has become the common practice to assess continuously the condition of the transformer and record key operation of a distribution transformer such as overvoltage, over current, temperatures, oil level rise or fall. Also it is important to keep an eye on transformer health when operator is not present actually at transformer site, so we are introducing a new system named as two way communication system between transformer and operator through microcontroller, In the control room, where the operator can see any related parameter value of transformer health in the control room. 25

introduction, block diagram, methodology, mathematical calculation, advantages, application, future scope, conclusion, acknowledgement, reference.

"Automation And Monitoring of Distribution Transformer", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.315-317, May-2019, Available :http://www.jetir.org/papers/JETIRBV06069.pdf

"Automation And Monitoring of Distribution Transformer", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp315-317, May-2019, Available at : http://www.jetir.org/papers/JETIRBV06069.pdf