• Devaraj
• Pradeep S
• Suresh
• Yashvant
• Pavan D

The implementation of an easily produced treadle pump could change the lives of millions of poor families in rural areas of developing countries. Ideally, a treadle pump design would be manufactured locally in the major cities of developing countries and then shipped to rural farms. These irrigation pumps are stepped on like a Stairmaster machine to generate a pumping action, which drives the pistons to lift water from a well, river, or other water sources. It was desired to limit the parts of the treadle pump produced like, the pump, cylinders, pistons, and the platform to which they mount. This project deals with lifting the water from 8 feet and to provide cost effective and efficient Treadle pump for poor agriculturist and it also deals with study of less cost pump, produce cost effective design and then implement it practically, our aim is to make a working practical model and also study by conducting experiment.

Treadle pump, Cylinder.

"Design and Fabrication of Treadle Pump", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.32-35, May-2019, Available :http://www.jetir.org/papers/JETIRBZ06007.pdf

"Design and Fabrication of Treadle Pump", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp32-35, May-2019, Available at : http://www.jetir.org/papers/JETIRBZ06007.pdf