• Manjunath G
• Ashik R
• Aadhithya Roy
• Abay Dev K S
• Vishnu Suresh

An Automated Guided Vehicle (AGV) is a set of co-operative driverless vehicle, used on manufacturing floor and coordinated by a centralized or distributed computer-based control system. AGV's-based Material Handling Systems (MHS's) are widely used in several Flexible Manufacturing System (FMS) installations. One of the challenges in MHS's is how flexible and adequate is the utilization. The main issue of the flexibility of MHSs is the routing system. It should be designed in a way that it can be easily modified to become adaptable to new or replaced machines. The main focus of this project is to make an AGV with the convenient materials, simple and applicable routing system and more importantly reducing the cost and increasing the flexibility. For this propose an AGV is basically modelled and designed with SIEMENS NX9 software and developed with special specifications.

DESIGN AND FABRICATION OF AUTOMATIC MATERIAL HANDLING ROBOT

"DESIGN AND FABRICATION OF AUTOMATIC MATERIAL HANDLING ROBOT", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.215-217, May-2019, Available :http://www.jetir.org/papers/JETIRBZ06035.pdf

"DESIGN AND FABRICATION OF AUTOMATIC MATERIAL HANDLING ROBOT", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp215-217, May-2019, Available at : http://www.jetir.org/papers/JETIRBZ06035.pdf