• Sachin.S. P
• Rajath.S
• Sanjay Patil. S
• Sangharsh Mudugal
• Vijee Kumar

In this present work, Al6061 used as base material and Carbon Nano Tubes (CNT’s)’s and Graphene were used as reinforcing materials to develop hybrid composites. Al6061 is mixed with CNT’s (2% in weight) and Graphene (0.5% and 1% in weight) using ball milling for different time duration for different set of samples to study the properties. The powder samples were prepared by using powder metallurgy technique. The blended powders compacted using hydraulic machine and obtained saples were subjected to sintering process carried out at 580℃ with nitrogen atmosphere. The blended powders were characterised using Scanning Electron Microscopy (SEM) and X-Ray Diffraction(XRD). The results shows hardness of the composites was subsequently increases for 2% CNTs and varying graphene.

Al6061, CNT’s, Graphene, Powder metallurgy, Characterization-SEM & XRD

"FABRICATION AND EVALUATION OF MECHANICAL PROPERTIES OF ALUMNIUM HYBRID NANO METAL MATRIX COMPOSITES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.365-370, May-2019, Available :http://www.jetir.org/papers/JETIRBZ06057.pdf

"FABRICATION AND EVALUATION OF MECHANICAL PROPERTIES OF ALUMNIUM HYBRID NANO METAL MATRIX COMPOSITES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp365-370, May-2019, Available at : http://www.jetir.org/papers/JETIRBZ06057.pdf