UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 5 Issue 7
July-2018
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRC006240


Registration ID:
184517

Page Number

1387-1391

Share This Article


Jetir RMS

Title

MACHINING OF AISI 304L AUSTENITIC STAINLESS STEEL : SURFACE ROUGHNESS AND TOOL WEAR ANALYSIS

Abstract

Stainless steels are widely used in architectural, food processing, chemical, oil and gas industries. It possesses good properties like corrosion and heat resistant, high strength and weldability. Among these grades, austenitic stainless steel AISI 304L can be used in the as-welded state even in severe corrosive environments. It is difficult to cut alloy. Many researchers have focused to improve the machinability of AISI 304L. This paper presents low speed eco-friendly dry machining of AISI 304L austenitic stainless steel with PVD coated indexible tool insert. Turning trials are conducted at four speeds (16.97m/min, 23.57m/min, 33.94m/min and 47.14m/min) at three feed rates (0.10mm/rev, 0.20mm/rev and 0.25mm/rev). Surface roughness and tool wear are two major aspects of machinability, are discussed in this paper and result will be helpful to understand dry machinability of AISI 304L at low speed.

Key Words

AISI 304L Stainless Steel, dry machining, surface roughness, tool wear, PVD coating.

Cite This Article

"MACHINING OF AISI 304L AUSTENITIC STAINLESS STEEL : SURFACE ROUGHNESS AND TOOL WEAR ANALYSIS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 7, page no.1387-1391, July-2018, Available :http://www.jetir.org/papers/JETIRC006240.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"MACHINING OF AISI 304L AUSTENITIC STAINLESS STEEL : SURFACE ROUGHNESS AND TOOL WEAR ANALYSIS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 7, page no. pp1387-1391, July-2018, Available at : http://www.jetir.org/papers/JETIRC006240.pdf

Publication Details

Published Paper ID: JETIRC006240
Registration ID: 184517
Published In: Volume 5 | Issue 7 | Year July-2018
DOI (Digital Object Identifier):
Page No: 1387-1391
Country: -, -, - .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003028

Print This Page

Current Call For Paper

Jetir RMS