• Stenin Vincent
• J. Pradeep
• Sankar raja

Nowadays, the electrical home appliance is the most essential prototype for controlling and maintaining the current status of technologies. The electrical home appliance wastage can be controlled by GPRS techniques with the support of GSM protocol through an SMS (Short Messages) mobile device and command from input string of ON and OFF controlling suitable while reducing the wastage of electrical waves through the GPRS receiving the control signal. An automatically enable the control switching ON and OFF process from the user controls. The user maintaining the home appliances like light, AC, fan, heater, washing machine, etc. These appliances can integrate with microcontrollers and GPRS network interface. This interface can be implemented by Embedded C commands with a supportive way of API microcontroller interfaces. The system is activated when the user sends the control signal to control the home appliance. The microcontroller unit automatically controls the electrical home appliances by switching ON or OFF the device according to the user direction.

GSM, GPRS, microcontroller, C commands

"INTERNET OF THINGS (IOT) ENABLED ELECTRICAL APPLIANCE CONTROLLING SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.76-78, May-2019, Available :http://www.jetir.org/papers/JETIRCI06014.pdf

"INTERNET OF THINGS (IOT) ENABLED ELECTRICAL APPLIANCE CONTROLLING SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp76-78, May-2019, Available at : http://www.jetir.org/papers/JETIRCI06014.pdf