UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 5
May-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRCP06011


Registration ID:
204706

Page Number

63-68

Share This Article


Jetir RMS

Title

SCREENING OF PHYSICOCHEMICAL PARAMETERS OF WATER SAMPLES FROM PUNE AREA, INDIA

Authors

Abstract

Water pollution is easier to study and manage but its control is highly complex and very costly. This paper presents study of some Physico-chemical parameters of water samples from Pune area viz. Sangvi, Kasarsai, Kasarwadi and University of Pune area. Physico-chemical parameters were analyzed using methods and procedures according to General Water Quality Indicators. In average the water sample from Pune area had the following measurement; pH (by pH meter) was ranging 6.3 -7.92, pH(by pH paper) 6-8, Temperature 20-24 0C, Turbidity 320-380 NTU, Total alkalinity 202 -204mg/L, Total hardness 58-66 mg/L, Electrical Conductivity 0.112-0.880 μs/cm, Total suspended solids 116-392 mg/L and Total dissolved solids 116-392 mg/L. Hardness 20-55 ppm. All samples were colorless and odorless. In some water samples chlorine was present. All the measured parameters were within the standard limits of water quality values suggested by WHO This study recommends that future studies must include biological parameters instead of using only physico-chemical parameters to assess the quality of water. The study concludes that pH values of all drinking water samples are according to EC rules and pH can be measured accurately by pH meter rather than using pH paper, TDS (ppm) of Pawana river water, Sangvi higher than standard limits .It is hard water so it should not use directly. It is necessary to make it soft by boiling and then UV filtration. The above parameters are in range in Pawana river water, Sangvi and Kasarwadi,Pune University well water and Hinjewadi water but still few more parameters are necessary to measure the potability of water like Escherichia coli is abundant in human and animal farces which is very harmful for human health.

Key Words

Physico-chemical, Total hardness, drinking water, potability, UV filtration

Cite This Article

"SCREENING OF PHYSICOCHEMICAL PARAMETERS OF WATER SAMPLES FROM PUNE AREA, INDIA ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.63-68, May - 2019, Available :http://www.jetir.org/papers/JETIRCP06011.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"SCREENING OF PHYSICOCHEMICAL PARAMETERS OF WATER SAMPLES FROM PUNE AREA, INDIA ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp63-68, May - 2019, Available at : http://www.jetir.org/papers/JETIRCP06011.pdf

Publication Details

Published Paper ID: JETIRCP06011
Registration ID: 204706
Published In: Volume 6 | Issue 5 | Year May-2019
DOI (Digital Object Identifier):
Page No: 63-68
Country: -, -, - .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002872

Print This Page

Current Call For Paper

Jetir RMS