UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 5
May-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRCU06066


Registration ID:
218615

Page Number

332-336

Share This Article


Jetir RMS

Title

Design and Development of a Structural Health Monitoring System Using Light Fidelity

Abstract

Visible light communication means, communication from one point to another using light. Visible light communication is an area which is yet to be fully explored. The advantage of VLC is that there is no need to bother about the spectrum as the entire visible communication range can be effectively utilized for communication. In areas like that of a bridge, where the monitoring of its health is a major concern due to various natural changes happening, abnormal vehicle population, improper construction of the bridge etc, the importance of health monitoring is necessary for the safety of human beings. It is with this intention; this idea is introduced which will ease the health monitoring with no additional expense of its own. The health monitoring of the bridge is done based on the various parameters like strain/stress induced on the structure, wind speed, temperature and condition of the road. All this information can be obtained by using a single mote(node) that consists of several sensors which can sense the required parameters. The next step is to send the sensed data to the desired location. The current mechanism involves sensing data and transmitting it wirelessly using utilizing the frequency spectrum. The problem of sending in that way is the availability of the spectrum and the loss incurred if the base stations are far from each other. This issue can be resolved by sending the data wirelessly by using light. Flickering can be used to send the data by means of LED arrays. If the LED is ON that indicates a 1 and if LED is OFF and this indicates data is 0. By proper flickering of LED and LED arrays transmission can be done between two motes if there is a light transmitting and receiving devices at each mote. The mote can be used to send the sensed data by itself or can be used to mirror or transfer the data it receives from other motes to some other motes or to the desired location.

Key Words

Structural health monitoring, mote, LED, visible light communication

Cite This Article

"Design and Development of a Structural Health Monitoring System Using Light Fidelity", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.332-336, May 2019, Available :http://www.jetir.org/papers/JETIRCU06066.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Design and Development of a Structural Health Monitoring System Using Light Fidelity", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp332-336, May 2019, Available at : http://www.jetir.org/papers/JETIRCU06066.pdf

Publication Details

Published Paper ID: JETIRCU06066
Registration ID: 218615
Published In: Volume 6 | Issue 5 | Year May-2019
DOI (Digital Object Identifier):
Page No: 332-336
Country: Chennai, Tamil Nadu, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002953

Print This Page

Current Call For Paper

Jetir RMS