UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 5
May-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRCW06019


Registration ID:
217224

Page Number

98-104

Share This Article


Jetir RMS

Title

Some studies into Slicing of Titanium alloy using Wire Electro-Discharge Machining Process

Abstract

Wire EDM has evolved as one of the promising method for the processing of advanced materials like ceramics, composites and super alloys. Titanium alloy are demanding material because they have properties like high strength to weight ratio and also have exceptional corrosion resistance. Photovoltaic and chemical industries has demand of sliced parts and wafers as an important component and existing ingot cutting methods adopt contact forces in slicing that easily causes larger variation in the thickness of the sliced piece and higher surface roughness. Wire-EDM is potential process for slicing of advanced and brittle material. The proposed work aims to demonstrate slicing capability of wire EDM of hard material Titanium (grade 2) using Taguchi’s L9 (34) orthogonal array. The optimising technique used is Taguchi based Grey Relational Analysis (TGRA). The influence of process parameters namely pulse on time, pulse off time, wire tension and wire feed rate on the performance characteristics like material removal rate and surface roughness has been studied in the present work. Slicing of Titanium can be effectively done with the use of Wire EDM. It is found that pulse on time is highest significant factor for MRR and Surface roughness. As pulse on time increases MRR increases and surface roughness also increases. With the help of TGRA the best combination for optimization found are pulse on time 5 µs, pulse off time 7 µs, wire tension 10 kg and wire feed rate is 2 m/min.

Key Words

Titanium super alloy, WEDM, Slicing, process parameters, TGRA, Multi-objective optimization

Cite This Article

"Some studies into Slicing of Titanium alloy using Wire Electro-Discharge Machining Process", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.98-104, May 2019, Available :http://www.jetir.org/papers/JETIRCW06019.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Some studies into Slicing of Titanium alloy using Wire Electro-Discharge Machining Process", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp98-104, May 2019, Available at : http://www.jetir.org/papers/JETIRCW06019.pdf

Publication Details

Published Paper ID: JETIRCW06019
Registration ID: 217224
Published In: Volume 6 | Issue 5 | Year May-2019
DOI (Digital Object Identifier):
Page No: 98-104
Country: -, --, - .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002999

Print This Page

Current Call For Paper

Jetir RMS