• Sandeep Bansal
• Jonty Mago
• Dheeraj Gupta
• Vivek Jain

In the current study microwave energy has been used to develop composite clad of Ni+10%Cr3C2(by wt%) on SS-316 substrate in a domestic microwave oven, generally used for low-temperature applications, having a frequency range of 2.45GHz and 900W power. The developed composite clad are characterized by various metallurgical and mechanical techniques such as SEM/EDS, XRD and Vickers microhardness. The developed composite clad of thickness 750µm show fine microstructure without any visible cracks and significantly less porosity. The microhardness of developed composite clad has evaluated 430±65 HV. The various hard carbide phases Cr3Si, NiC, Cr3Ni2SiC, CrSi2, SiC, FeNi3 have been confirmed from XRD study.

Cr3C2, Composite Clad, Characterization, EWAC, Microwave Energy

"MICROSTRUCTURAL CHARACTERISTICS OF MICROWAVE PROCESSED NI-10%CR3C2 COMPOSITE CLADDING", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.463-467, May 2019, Available :http://www.jetir.org/papers/JETIRCW06090.pdf

"MICROSTRUCTURAL CHARACTERISTICS OF MICROWAVE PROCESSED NI-10%CR3C2 COMPOSITE CLADDING", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp463-467, May 2019, Available at : http://www.jetir.org/papers/JETIRCW06090.pdf