• Vijaya P.Wanjari

In this paper various analysis and design methods were proposed for reasonable design of reinforced earth retaining wall. Limit equilibrium analysis is mostly used to decide the safety factor for failure of retaining wall. This design method shows different results according to differences for assumptions and application of safety factor because equilibrium for stresses and moment is analyzed assuming stress condition and shape of active failure plane and pullout resistance of geosynthetic reinforcements. Therefore for analysis of the internal and external stability two methods are consider i.e. by Modified Rankin’s, Clayton & Wood. Comparing the external and internal stability it is found that Clayton and Woods, shown intermediate result while Modified Rankin’s method shows most conservative results and easy to understand.

Economical Design of Reinforced Earth Retaining Wall

"Economical Design of Reinforced Earth Retaining Wall", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.85-101, June 2019, Available :http://www.jetir.org/papers/JETIRDH06015.pdf

"Economical Design of Reinforced Earth Retaining Wall", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp85-101, June 2019, Available at : http://www.jetir.org/papers/JETIRDH06015.pdf