• Bilal Ahmad Sheikh
• Pushpendra K Sharma

ABSTRACT This project is based on the topic design and estimation of steel shed. Different workshop like welding, bar bending, scaffolding and brick masonry will take place under one roof. The major aspect before erection of any building is testing the soil. After performing certain tests discussed further we found that the soil is stiff. So, we took certain measures and design aspects according to that. Next, we started designing the structure as our structure is completely a steel structure we designed it according to IS 800:2007, IS 875(Part 3):1987. We designed for the fink truss members, columns and footing. For the design of footing we used IS 456:2000. Then we started with the estimation of the project. We calculated the cost of each and every member section which we are using in the design and also calculated the cost of bricks, paver blocks which we are going to provide on the ground. We also included various labour cost in the estimation. Then we calculated the entire cost of the project and we found out to be around Rs.1300000.

Key Words: Estimation, Steel shed, Design and estimation, scaffolding.

"DESIGN AND ESTIMATION OF STEEL SHED", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 12, page no.224-229, December 2018, Available :http://www.jetir.org/papers/JETIRDZ06029.pdf

"DESIGN AND ESTIMATION OF STEEL SHED", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 12, page no. pp224-229, December 2018, Available at : http://www.jetir.org/papers/JETIRDZ06029.pdf