UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 3
March-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIREL06076


Registration ID:
305749

Page Number

502-507

Share This Article


Jetir RMS

Title

Optimisation the Sintering of Al-MMCs by PM approach and advancement in the tribological properties of Al composites

Abstract

The aluminium Metal matrix composites (MMCs) have extensively used in industrial applications due to the lighter weight with high specific strength, good thermal behaviour and high stiffness. But the Processing of aluminium at high temperature is very difficult and complex task due to its reactive nature. In the present work AMCs with graphite, SiC, Mg and zinc along with fly-ash as reinforcements fabricated using PM approach. Sintering carried out using powder silicon dioxide in place of inert gas or vacuum chamber with designed arrangements. Characterization of composites carried out using hardness testing, wear rate and measurement of friction coefficient. Present way of sintering give more effective results than conventional methods along with considerable reduction in manufacturing cost. Effect of varying sintering time, sintering temperature and compaction pressure observed using taguchi approach on output properties of produced. Composite with 800 kN at 660oC for 3 of sintering has better hardness compared with all composites. But with 800 kN at 690oC for 4.5 hours of sintering have better wear behaviour compared with all composites.

Key Words

Composite, Taguchi’ approach, Al MMCs, Sintering and Fly-ash

Cite This Article

"Optimisation the Sintering of Al-MMCs by PM approach and advancement in the tribological properties of Al composites", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.502-507, March-2019, Available :http://www.jetir.org/papers/JETIREL06076.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Optimisation the Sintering of Al-MMCs by PM approach and advancement in the tribological properties of Al composites", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp502-507, March-2019, Available at : http://www.jetir.org/papers/JETIREL06076.pdf

Publication Details

Published Paper ID: JETIREL06076
Registration ID: 305749
Published In: Volume 6 | Issue 3 | Year March-2019
DOI (Digital Object Identifier):
Page No: 502-507
Country: Moga, Punjab, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002950

Print This Page

Current Call For Paper

Jetir RMS