• Kaushik V Prasad
• Sunil Bhat

Ozone (O3) is indeed a solid oxidant which could be utilized to disinfect ground or wastewater, as well as to remove microbes, inorganic particles, including natural pollutants from wastewater. The most common use of O3 would be as a biocontrol agent in the treatment of contaminated water. The removal dynamic stable of the microbe could be utilized to assess the critical O3 appearance needed for a given degree of sterilization. By oxidizing iron, manganese, and arsenic in water, O3 creates an insoluble framework which can then be filtered out. The two procedures need O3 in atomic structure, however, the expulsion of natural contaminations that are headstrong to different medications could be conceivable as it were by misusing the backhanded radical responses that happen during ozonation. In water, O3 disintegrates into the hydroxyl radical, the much more ground oxidizer accessible in water purification, especially where hydrogen peroxide is present. To adjust the O3 dosages to the optimal degree of elimination of assured poison or a complete ratio of pollution, prototypes for the O3 technique are needed. Mineralization, described as the elimination of natural carbon from wastewater, has been used in municipal and local treatment plants. The findings indicate that the logarithmic decline of TOC as a part of the critical O3 implementation usually has two zones with different dynamic variables.

Contamination, Microorganisms, O3, Sterilization, Water Treatment, Chlorine, Oxidation.

"A Paper on Ozone Water Treatment", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.1-6, January-2019, Available :http://www.jetir.org/papers/JETIREU06001.pdf

"A Paper on Ozone Water Treatment", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp1-6, January-2019, Available at : http://www.jetir.org/papers/JETIREU06001.pdf