• Ramkumar N
• Raghavendra Rao P S

One of the necessary purpose of the modified slider-crank framework is to transform rotating motion into reciprocal motion, thus obtaining a "closed curved" movement at the reciprocal end, in place of a linear movement. This is achieved by changing the mechanism of the screwdriver. The resulting "closed curved" movement can be used to construct useful work. The slider-crank framework is a special 4-bar link configuration, which displays both linear and rotational motion at the same time. This method is frequently used for studying computer kinematics and the related dynamic forces in undergraduate engineering courses. The location, speed and shaking forces generated during operation by a slider wardrobe mechanism can be analytically determined. In analytical calculations, certain factors are often ignored that cause differences in results from experimental data. The analysis of these minor variances provides a valuable summary. The following study explains how a pneumatically driven slider mechanism for demonstration and experimentation in a classroom is developed, manufactured and tested. During operation, transductions attached to the mechanism record movie and dynamic force data which can be comparable with analytical results. In a balanced and unbalanced way, the system can measure the severity of the forces of shaking. The motor was produced successfully and works as planned. The data obtained by the accelerometer of the device is equivalent to the acceleration and shock force measured values.

Linear Motion, Kinematic, Nonlinear controller, Rotary Motion, Slider-crank mechanism.

"A Brief Review on Slider-Crank Mechanism", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.129-133, January-2019, Available :http://www.jetir.org/papers/JETIREU06025.pdf

"A Brief Review on Slider-Crank Mechanism", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp129-133, January-2019, Available at : http://www.jetir.org/papers/JETIREU06025.pdf