• Rahul Vishnoi

The paper is designed to develop a platter positioning system that can be operated using a conventional television remote. The main application of using a dish is to receive signal from satellites and other broadcasting sources. It needs to be manually adjusted to position the dish to the exact angle to receive the maximum signal of a particular frequency. PIC microcontroller was developed in this paper to create a satellite dish positioning system which can be controlled with remote control. The key point of using a dish is transmitting signal from satellites and other sources of broadcast. To get the exact angle of the dish's location, it needs to be manually changed. To solve the difficulty of manually changing, this paper helps by remote control to adjust the location of the bowl. Remote control serves as a transmitter whose data is transmitted by an IR receiver that is interfaced with a PIC 16F877A microcontroller. Remote control sends coded data to the receiver whose output is then forwarded to the microcontroller. This framework is also used for the implementation of simple pro language. The microcontroller sends the control signals via an interface known as a relay driver to the motor.

PIC 16F877A, Infrared (IR), Television, Remote Control, DC Motor, Satellite Dish.

"Satellite Dish Positioning Using IR Remote Control", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.501-507, March-2019, Available :http://www.jetir.org/papers/JETIREY06101.pdf

"Satellite Dish Positioning Using IR Remote Control", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp501-507, March-2019, Available at : http://www.jetir.org/papers/JETIREY06101.pdf