• Priyanka Salunkhe
• Abhijeet Keskar
• Prajakta Agawane
• Durita Chaudhari
• Sakshi Patil

This paper discuss the behavior of shape memory alloy. In recent years the deterioration of reinforced concrete is widely increased. To improve the life span and strength of reinforced concrete structures the several materials has been used like shape memory alloy. SMA material has a property to regain its original shape and ability to withstand the large deformation. SMA were used to replace the steel bars at the critical region of beam. The conventional reinforcement bars and Fe-SMA reinforcement bars is studied by analytical results The beam size of 150x150x700mm with #2-10mm diameter is reinforced in tension side while #2-10mm in compression side and 2- legged 8mm diameter stirrups at 150 mm c/c used as shear reinforcement. The analysis of beam is done by ANSYS 2021R1. By non –linear finite element modeling, the deformation in RC beam with conventional reinforcement bars and Fe-SMA reinforcement bars are calculated. A comparison between Fe-SMA and conventional reinforcement is done in ANSYS 2021R1 for evaluating deflection of RC beam to obtain more durability between them.

Shape Memory Alloy, Fe-SMA, Steel, ANSYS

"ANALYTICAL STUDY OF IRON-BASED SHAPE MEMORY ALLOY TO SUSTAIN SERVICEABILITY IN CIVIL STRUCTURES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 10, page no.359-364, October-2021, Available :http://www.jetir.org/papers/JETIRFD06057.pdf

"ANALYTICAL STUDY OF IRON-BASED SHAPE MEMORY ALLOY TO SUSTAIN SERVICEABILITY IN CIVIL STRUCTURES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 10, page no. pp359-364, October-2021, Available at : http://www.jetir.org/papers/JETIRFD06057.pdf