• Askari Imam Khan
• Dr. Praveen Kumar

During salt spray accelerated corrosion testing, coated samples are subjected to a corrosive attack in order to evaluate (mostly quantitatively) the coating's suitability for use as a protective finish. To lessen the severity of this problem, the automotive industry has employed friction stir spot joining and mechanical fastening processes like the self-pierce riveting method. This paper presents the results of an experimental investigation into the mechanical properties of annealed and unannealed AA1100 sheet of 0.5mm thickness and a comparison of these two materials. Annealed and unannealed AA1100 are subjected to tensile, flexural, and drop impact tests to establish their mechanical properties. The corrosion resistance of annealed and unannealed AA1100 was evaluated using a salt spray test.

AA1100, Tensile Test, Flexural Test, Drop Impact Test, Salt Spray Test

"THE TECHNICAL PAST AND PRESENT OF SALT SPRAY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 10, page no.22-30, October-2022, Available :http://www.jetir.org/papers/JETIRFU06003.pdf

"THE TECHNICAL PAST AND PRESENT OF SALT SPRAY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 10, page no. pp22-30, October-2022, Available at : http://www.jetir.org/papers/JETIRFU06003.pdf