• Tejas Ramdas Pacharne
• Abhijit Rajendra Divekar
• Rohit Amol Aher
• Dhawal Giridhar Bharambe
• Sagar B. Deokar

Vehicle Control is main essential part of automobile; without control we can’t handle vehicle. Nowadays most of the four-wheeler are having steering system which is based on Ackermann principle. Steering system which is used to steer the front wheels of vehicle with driver inputs in order to provide overall directional control of the vehicle. Thus, Steering system play very important role in handling of vehicle. Steering mechanism invented by the Ackermann allowing the vehicle to turn along the flow of the path as Ackermann steering. The steering system is firstly used to control the direction of the vehicle. In our system pitman arm plays a very important role in steering system as it transmits the steering movement to the wheel. The Pitman arm is an attached linkage to tie rod which converts the angular motion of the steering wheel shaft into the linear motion which is needed to steer the wheels of vehicle

Ackermann geometry, Camber angle, Castor angle, Kingpin inclination, Toe angles, Types of steering, Steering ratio, Steering effort, Effect of centrifugal force, Over steer, Under steer, Steering Wheel, Steering Column, Tie rod, Pitman Arm, Knuckle.

"Design and Development of Steering Wheel Mechanism in Electric Vehicle", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 5, page no.707-712, May-2023, Available :http://www.jetir.org/papers/JETIRFX06124.pdf

"Design and Development of Steering Wheel Mechanism in Electric Vehicle", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 5, page no. pp707-712, May-2023, Available at : http://www.jetir.org/papers/JETIRFX06124.pdf