• AKSHAY SOMNATH MALI
• VARSHA SHIVAJI SALOKHE
• SHAHENAJ IMAM SHAIKH
• AMRUTA KAPSE

The main aim of the project is that when the fuse is blown out then a person can easily change to another fuse automatically when the indication is obtain by the circuit to a person. Thus a person can easily change the switch and continuity of supply is obtained. Also a person is avoided from getting shock while changing the fuse.. It will also help in industries to maintain the continuity of the supply. We used Arduino uno for automation purpose. Relays are used for sensing the fault current. Red and green lights are used for indication purpose. Buzzer is also used for purpose of indication when the fuse is blown out. fuses area unit used for the bar of home appliances from the short and injury by overload or high current etc. If we have a tendency to don’t use fuses, electrical faults occur in the wiring and it burns the wire and electric appliances and may starts fire at home. The lives of television, computers, radios and other home appliances may also put at risk. When the fuse goes, a sudden spark occurs which may lead to turning your home into sudden darkness by disconnecting the power supply which saves any further mishappenings. That’s why we want fuses to guard our home appliances from damage.

Automation, fuses, Arduino Uno, Relays, Red and green light, Buzzer.

"FUSE MONITORING AND AUTO CHANGE OVER SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.26-30, May-2019, Available :http://www.jetir.org/papers/JETIR1905N05.pdf

"FUSE MONITORING AND AUTO CHANGE OVER SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp26-30, May-2019, Available at : http://www.jetir.org/papers/JETIR1905N05.pdf