UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 5 | May 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 6 Issue 5
May-2019
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1905N90


Registration ID:
212774

Page Number

594-602

Share This Article


Jetir RMS

Title

HOUSE CONNECTION WORK IN SEWER LINE

Abstract

Sewerage involves the major portion of the cost of a wastewater system. In the design of a sewerage system the sewer line is the basic unit occurring repeatedly in the design process. Any savings during the design of this unit will affect the overall cost of the sewerage system. There are two types of sewer systems: storm water systems and sanitary sewers. Storm water systems or drains carry rainwa-ter, ground water and road runoff water to an open body of water, such as streams, lakes and oceans. Sanitary sewers, however, carry wastewater from residential and commercial buildings to a treatment plant where the contaminants in the water can be removed. Since the 1930s, storm drains and sanitary drains have been installed separately to prevent cross contamination. In a residence, the home's drain system is connected to the city sewer by an underground pipe called a lateral line, usually 4 to 6 inches in diameter, installed at a slope to use gravity for water flow. The size of the home's drain piping is determined by the amount of flow possible and the type of waste material anticipated. For example, a bathroom sink usually has low volume and little if any solids in the water. These pipes are normally 1 ¼ inches in diameter. Bathtub, washing machine and kitchen sink drains carry larger volumes, with food and other solids possible in the kitchen sink. Therefore, a larger diameter pipe is necessary, usually 1 ½ inches in diameter. Any plumbing beneath the house is large enough to accept the flow from the fixture drains. A 2-inch diameter pipe is common. All of these drains flow into the toilet drain to exit the building, so the toilet drain is the largest and matches the lateral line going to the city sewer system.

Key Words

Cite This Article

"HOUSE CONNECTION WORK IN SEWER LINE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.594-602, May-2019, Available :http://www.jetir.org/papers/JETIR1905N90.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"HOUSE CONNECTION WORK IN SEWER LINE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp594-602, May-2019, Available at : http://www.jetir.org/papers/JETIR1905N90.pdf

Publication Details

Published Paper ID: JETIR1905N90
Registration ID: 212774
Published In: Volume 6 | Issue 5 | Year May-2019
DOI (Digital Object Identifier):
Page No: 594-602
Country: KANPUR NAGAR, Uttar Pradesh, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002992

Print This Page

Current Call For Paper

Jetir RMS