JETIREXPLORE- Search Thousands of research papers



Published in:

Volume 7 Issue 6
June-2020
eISSN: 2349-5162

Unique Identifier

JETIR2006490

Page Number

1077-1081

Share This Article


Title

DESIGN AND IMPLEMENTATION OF MAGNETIC LEVITATED WIND GENERATOR

ISSN

2349-5162

Cite This Article

"DESIGN AND IMPLEMENTATION OF MAGNETIC LEVITATED WIND GENERATOR", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 6, page no.1077-1081, June-2020, Available :http://www.jetir.org/papers/JETIR2006490.pdf

Abstract

This paper dwells on the implementation of an alternate configuration of a wind turbine for power generation purposes. Here we have used Magnetic levitation vertical axis wind turbine to generate power instead of conventional wind turbine. The basic Principles used in this project are Magnetic Levitation and Faradays Law of Electromagnetic Induction. Magnetic levitation is a method by which an object is suspended above another object with no support other than magnetic fields. The electromagnetic force is used to counteract the effects of the gravitational force. Magnetic levitation is used to reduce the energy loss due to friction. This energy wasted in friction can be saved by maglev method. The main aim of this project is to eliminate ball bearings which are normally used on conventional wind turbine. Two powerful magnets of same poles are placed one over other for levitation.8 Cup shaped wind turbine blades are fitted at 45degrees between the two circular shaped plates supported on a shaft. Blades are designed such a way that the system has the ability to operate in both low and high wind speed conditions. This assembly is suspended on levitated magnets as a replacement of bearings. Permanent magnets are fitted on the rotor; the changing flux induces EMF in the coils provided beneath them. We have used 4 No volt coils on the stator which are placed such a way that the total flux is additive in nature. Power will then be generated with an axial flux generator, which incorporates the use of permanent magnets and a set of coils. The power generated in this project is 6 volts which is used to deliver a basic loads like LED Bulbs, Fans, etc.

Key Words

MAGLEV, Wind Power

Cite This Article

"DESIGN AND IMPLEMENTATION OF MAGNETIC LEVITATED WIND GENERATOR", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 6, page no. pp1077-1081, June-2020, Available at : http://www.jetir.org/papers/JETIR2006490.pdf

Publication Details

Published Paper ID: JETIR2006490
Registration ID: 234727
Published In: Volume 7 | Issue 6 | Year June-2020
DOI (Digital Object Identifier):
Page No: 1077-1081
ISSN Number: 2349-5162

Download Paper

Preview Article

Download Paper




Cite This Article

"DESIGN AND IMPLEMENTATION OF MAGNETIC LEVITATED WIND GENERATOR", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 6, page no. pp1077-1081, June-2020, Available at : http://www.jetir.org/papers/JETIR2006490.pdf




Preview This Article


Downlaod

Click here for Article Preview