• Nirmal S. Mehta
• Urmi D. Modi
• Parth R. Patel
• Rutvik M. Prajapati

Present study represents the analysis and design of ten storey residential building with basement. The building is considered in Ahmedabad (Gujarat) region. The sizes of various structural elements are decided after optimization. For analysis and design, building model is generated in ETABS 2013 software. The various parameters like centre of mass, centre of stiffness, displacement of building, storey drift and rotational displacement are considered for analysis purpose. It is observed that centre of mass and centre of stiffness are depending on the orientation of column. It is also observed that eccentricity in Y-direction is very high as compared to X-direction due to unequal mass distribution at top floor. According to design report provided by ETABS all the values of stresses and storey drift are under limit as mentioned in IS 456:2000 and IS 1893:2002.

Analysis, Design, Storey Drift, Storey Displacement

"Analysis and Design of Multi Storey Residential Building Using ETABS ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 11, page no.874-879, November-2018, Available :http://www.jetir.org/papers/JETIRK006132.pdf

"Analysis and Design of Multi Storey Residential Building Using ETABS ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 11, page no. pp874-879, November-2018, Available at : http://www.jetir.org/papers/JETIRK006132.pdf