UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 4 Issue 6
June-2017
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1706072


Registration ID:
225910

Page Number

358-362

Share This Article


Jetir RMS

Title

FABRICATION OF MAGNESIUM BASED COMPOSITES USING FRICTION STIR PROCESSING

Abstract

Magnesium has gathered extensive approval in the manufacturing of light weight composites, which require a high strength to weight ratio. Compared to as-cast magnesium, friction stir processing is an emerging solid state processing in which the hardness is increased and casting defects get reduced as compared to as cast base material. This process uses non consumable tool to generate friction heat in the surface. The FSP parameters such as tool pin profile, speed and reinforcement particle plays a major role in the deciding stir zone quality. In the current investigation an attempt is made to understand the effect of tool rotation speeds (1000,1200 and 1400 rpm), single/double pass and the reinforcement particles such as Silicon carbide (SiC), Alumina (Al2O3), Chromium(Cr), Silicon powder (SiP) on properties of pure magnesium based composites fabricated by FSP. A cylindrical pin tool was used with a pin diameter 5 mm, pin length of 4 mm and a shoulder diameter of 20 mm. The process was run at constant transverse speed of 40 mm/min. The considerable changes in the hardness, impact strength and tensile strength properties were obserevd in the stir region zone.

Key Words

Friction stir processing; pure magnesium; microstructure; mechanical properties

Cite This Article

"FABRICATION OF MAGNESIUM BASED COMPOSITES USING FRICTION STIR PROCESSING", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.4, Issue 6, page no.358-362, June-2017, Available :http://www.jetir.org/papers/JETIR1706072.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"FABRICATION OF MAGNESIUM BASED COMPOSITES USING FRICTION STIR PROCESSING", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.4, Issue 6, page no. pp358-362, June-2017, Available at : http://www.jetir.org/papers/JETIR1706072.pdf

Publication Details

Published Paper ID: JETIR1706072
Registration ID: 225910
Published In: Volume 4 | Issue 6 | Year June-2017
DOI (Digital Object Identifier):
Page No: 358-362
Country: -, -, - .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003108

Print This Page

Current Call For Paper

Jetir RMS