• RAGHAVENDRAN S

The scope of the present investigation is to assess the properties of Autoclaved Aerated Concrete (AAC) by using Ternary Blending Materials. Totally 24 specimens were casted, in that 16 specimens are AAC blocks & cubes and 8 specimens are concrete cubes. From this investigation AAC with TBM2 (AAC + Silica Fume) shows massive increase in the ultimate load of 10.5% when compared to control specimens. While TBM3 (AAC+NaOH solution) specimen, there is a marginal decrease in ultimate load of 3.5% and there is a reasonable increase in ultimate load of 8.45% for TBM1 (AAC+Metakaolin). While considering concrete specimens, the concrete with TBM2 shows 11.39% increase in the ultimate load. For concrete with TBM1 there is 10.28% increase in the ultimate load. When compared to control specimen, concrete with TBM 3 there is a slight decrease in the ultimate load of 1.78%.

TERNARY BLENDING MATERIALS, METAKAOLIN, SILICA FUME, ULTIMATE LOAD

"EXPERIMENTAL STUDY ON AUTOCLAVED AERATED CONCRETE USING TERNARY BLENDING MATERIALS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 12, page no.313-322, December-2018, Available :http://www.jetir.org/papers/JETIR1812646.pdf

"EXPERIMENTAL STUDY ON AUTOCLAVED AERATED CONCRETE USING TERNARY BLENDING MATERIALS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 12, page no. pp313-322, December-2018, Available at : http://www.jetir.org/papers/JETIR1812646.pdf