• Rachit P Solanki
• VimalSalot

These Experimental work with reducing of burnishing process parameters new design ball burnishing tool. The work piece material is Aluminum Alloy 6061 and ball material is of high chromium high carbon, four balls of Different diameter are used. The levels of input process parameters are selected on basis of one factor at a time analysis. The different input parameters are burnishing Speed, burnishing Ball diameter, and number of passes and the response parameter are surface roughness and hardness .The experiment is design with Full factorial method carried out with above Three factors and Four levels. The optimum set of parameter is determined One factor, interaction and predicted vs. Actual graph.

Ball burnishing, Surface roughness, Surface Hardness, No of passes,No of diameter,cutting speed,Design Expert,ANOVA

"PARAMETRIC OPTIMIZATION OF BALL BURNISHING PROCESS FOR AA6061 MATERIAL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.700-708, April-2019, Available :http://www.jetir.org/papers/JETIR1904G09.pdf

"PARAMETRIC OPTIMIZATION OF BALL BURNISHING PROCESS FOR AA6061 MATERIAL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp700-708, April-2019, Available at : http://www.jetir.org/papers/JETIR1904G09.pdf