• Kotila HArsidhdhi Suresh bhai
• Vishal S. Vora

The project is concentrating on development of digital pattern generator and formatter for the high speed systems. As the technology advances the requirement of fast data transfer and processing arises. To meet the requirement the data should be read, write or processed in faster rates typically in Gbps. The proposed system is an effort to the same field and develops the high speed USB data pattern generator and formatter working in the Gbps speeds. USB is an interface that connects a device to a computer. With this connection, the computer sends or retrieves data from the device. USB gives developers a standard interface to use in many different types of applications. A USB device is easy to connect and use because of a systematic design process. Presently there are many systems available with USB 2.0 interface at 480 Mbps. The USB 3.0 specification, released in 2008, allows a maximum signaling rate of up to 5 Gbps (SuperSpeed), which is 10 times the signaling rate of High Speed. USB 3.0 based Digital Data Formatter card which acquires data from multiple data chains and feeds it to USB 3.0 module and it sends data to host PC over USB 3.0 cable, for storing the acquired data in the system memory of host PC for further evaluation.

USB 2.0, USB 3.0 CONTROLLER, SIMULATOR, FORMATTER, PATTERN GENRATOR, FPGA, PCIe, etc..

"USB 3.0 Based Digital Data Pattern Generator and Data Formatter", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.72-76, April-2019, Available :http://www.jetir.org/papers/JETIR1904K12.pdf

"USB 3.0 Based Digital Data Pattern Generator and Data Formatter", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp72-76, April-2019, Available at : http://www.jetir.org/papers/JETIR1904K12.pdf