• Dr. S. G. Makarande
• Mr. Jayant S. Ramteke
• Mr. M. R. Nikhar
• Mr. G. D. Dhawale

The comparative study on analysis of RCC Frame structure supported on a single column and multi-column is done in this project. This paper presents structural modelling, stress, bending moment, shear force and displacement, deflection design considerations for a structure and it is analyzed using STAAD-Pro. Various steps involved in designing of RCC Frame structure supported on a single column and multi-column by using software are geometric modelling, providing material properties and sectional Properties, fixing supports and boundary Conditions, providing loads & load combinations, Special Commands, Analysis Specification , Design Command and Report. The influence of plan geometry has an important role in static analysis. Maximum values of stresses, bending moments, shear forces and displacements and deflection are presented. The acting loads considered in the present analysis were dead load, Live load, floor load, and seismic load. In these cases the floor load was applied perpendicular to the RCC structure. Comparison on the basis of analytically results occurs between RCC single column and RCC multi column is done. In this paper, all those analysis & load calculation were executed with a Numerical Building Model by using software program, which were also compared following the analysis results. The results of the analysis on the axial forces, Base shear, Time period, Storey drift and Displacements are compared. The results are presented in tabular and graphical form. The project is to planning & analysis by using software for a multi storied building and single column building of G+4 floors. The design is done by taking in to account the requirements and standards recommended by IS code and national building rules. Planning is done using the 3D modelling software with the help of Auto-CAD 2014. STAAD-Pro uses a command language based input format, which can be created through an editor called the editor file, these powerful software graphics input generator or through Auto-CAD based input generators like Auto-CAD. Output generated by STAAD-Pro consists of detailed numerical results for analysis and design.

Multi-storied building, Single column building, Planning, STAAD-Pro, Modelling, Analysis…..

"A Review on Comparative Study on Analysis of a Conventional Multi-Storey Building & a Single Column Building", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.313-323, May-2019, Available :http://www.jetir.org/papers/JETIR1905I47.pdf

"A Review on Comparative Study on Analysis of a Conventional Multi-Storey Building & a Single Column Building", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp313-323, May-2019, Available at : http://www.jetir.org/papers/JETIR1905I47.pdf