• Govind
• Subh Kant Yadav
• Munesh kumar

The study during this paper is administered to check the workability of exploitation crushed over burn bricks to alternating the coarse mixture (gravel) in concrete. Two kinds of concrete intermixture are ready. the primary one may be a mixture of 1:2:4 while not crushed over burn bricks and is working as a reference mixture .The other is formed of various weight of crushed over burn bricks (as a proportion from the load of the coarse aggregate). a thorough of thirty numbers of concrete specimens are casted with and while not crushed over burn bricks and tested below compression and split tension as per related to British commonplace specifications. take a look at results indicated that mistreatment crushed bricks decreases the strength of concrete. Also, the proportion of water to cement magnitude relation will increase for constant slump once the proportion of crushed bricks enlarged. The results indicate that the crushed over burn brick are appropriate to switch the granite mixture in concrete production. Trial mixes of crushed over burn brick concrete were ready by substitution the Granite Aggregate with 25%, 50%, 75% and 100 percent crushed over burn bricks by volume. M20 grade of each Granite aggregate and crushed over burn brick concretes were ready and tested to match the compressive strength. The take a look at results showed that it's doable to provide crushed over burn brick concrete with characteristics like those of Granite aggregate concrete with 25% replacement.

over burn brick, coarse aggregate, concrete, cement, mixture, practicability

"Behavioural characteristics of over burn crushed Brick as Coarse Aggregate in Concrete mix", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.533-539, June-2019, Available :http://www.jetir.org/papers/JETIR1906660.pdf

"Behavioural characteristics of over burn crushed Brick as Coarse Aggregate in Concrete mix", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp533-539, June-2019, Available at : http://www.jetir.org/papers/JETIR1906660.pdf