• Venkata Somi Reddy.J
• V Venkatesu
• R Praveen Kumar

Abstract: Wind energy is one of the non-regular types of energy and it is accessible in wealth. Power can be created with the assistance of vertical hub wind turbine. This task points of using this breeze energy in best way to get the most extreme electric yield, and along these lines we chose thruway as our establishment site where we can exploit the moving vehicles on both the sides of the street. In the present work, turbine is plan and manufactured according to the determinations, the sharp edges utilized are semi-round shape and are associated with the plate which is associated with shaft. Shaft is then combined with pulley with the assistance of bearing, and afterward pulley is associated with the alternator, which creates the power. The power created is put away in battery and after that can be utilized for road light, sign or toll. In this task a little model has been made for testing reason. This task additionally goes for most extreme yield with least expense. The geometrical model is created utilizing CATIAv5 and imported to ANSYS18.0 for examination. Familiar examination is performed by change of wind speeds. Vibration analysis is done to check the safety against resonance.

VAWT, Design, Fabrication, CATIAv5, ANSYS18.0

"Fabrication and Analysis of Vertical Axis Wind Turbine on Highways", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.258-265, June-2019, Available :http://www.jetir.org/papers/JETIR1906964.pdf

"Fabrication and Analysis of Vertical Axis Wind Turbine on Highways", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp258-265, June-2019, Available at : http://www.jetir.org/papers/JETIR1906964.pdf