• Kanchan Kushwaha
• Dr. Rakesh Kumar
• Dr. Pramod Sharma

Abrasion Abrasion resistance of the pavement concrete is one of the parameters to measure its durability. It is a surface wear that causes progressive loss of material from surface.The abrasion resistance of concrete is directly related to its strength and the increase in resistance is principally due to an increase in cement content and reduction of water content. Fibers are generally used as resistance of cracking and strengthing of concrete.To overcome abrasion resistance of pavement concrete, sometimes the addition of steel fiber to the concrete mix is suggested. This paper briefly discusses the effects of addition of 0.5% steel fiber on the abrasion resistance of pavement concrete with 15% fly ash replacement with cement and silica fume additive 3% as a cementitious material mix of 30, 40 and 60 MPa compressive strength at 28-day. In this study double hooked steel fiber with aspect ratio 65 was used. To obtained results shows by the addition of steel fiber the properties such as compressive strength, flexural strength, and abrasion resistance of the concrete was improved.

Abrasion resistance, Abrasion, Steel Fiber, Pavement concrete.

"Influence of Abrasion Resistance on Pavement Concrete Containing Steel Fiber", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.469-476, June 2019, Available :http://www.jetir.org/papers/JETIR1906W61.pdf

"Influence of Abrasion Resistance on Pavement Concrete Containing Steel Fiber", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp469-476, June 2019, Available at : http://www.jetir.org/papers/JETIR1906W61.pdf