• Mahadev S Soudagar
• Prof. S. H. Limaye

Brake hose means a flexible conduit manufactured for use in a brake system to transmit or contain the fluid pressure or vacuum used to apply force to a vehicle’s brakes. Brake hose assembly means a brake hose, with or without armor, equipped with end fittings for use in a brake system. Hydraulic hose assemblies are used in almost all machinery and plants applying hydraulically controlled component groups , in particular, where rigid pipes for power transmission cannot be used. Due to defective binding, ageing, wear, damage, load and for other reasons, hydraulic hose assemblies represent a various hazard. Therefore it is very important to check hydraulic hose assemblies at regular intervals of time and to replacing them in case of failure or aging. In this work, a test rig is designed and developed for volumetric exapansion and hot impulse test for hydraulic brake hose according to specifications of SAE J1401 and SAE J1833 respectively. In this test setup pressure is applied to a hose by using master cylinder and hydraulic power pack assembly and to control overall process programmable logic control with HMI display is used.

Hydraulic hose , volumetric expansion , SAE, Hot impulse.

"Design and Development of Volumetric Expansion and Hot Impulse Test system for Hydraulic Brake Hose ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.333-339, June 2019, Available :http://www.jetir.org/papers/JETIR1907188.pdf

"Design and Development of Volumetric Expansion and Hot Impulse Test system for Hydraulic Brake Hose ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp333-339, June 2019, Available at : http://www.jetir.org/papers/JETIR1907188.pdf