• Shivam Kanthale
• Dr. Kashinath Munde
• Ashish pawar
• Dr. Suresh Kanthale

The method to weld Titanium Alloy with high power (CW) CO2 laser has been analyzed. The principal purpose of this study was to find out the determinative effect of laser beam location with respect to the joint. Laser welding method was effectively used for joining titanium alloy. In the present study, laser welding method onTitanium Alloy sheet of 2 mm, 3mm, 5mm by investigation resulted to identify the anticipation model. A statistical DOE method full factorial design with help of design expert software has been used to designing experimental work. The chosen laser welding input factors (laser power, travelling speed & focal position) have been used & the co-relation between these various factors has been investigated.

Laser, Titanium alloy, Taguchi, Annova, Minitab17

"An Experimental Investigation of Laser welding process parameter for Titanium Material", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.975-981, June 2019, Available :http://www.jetir.org/papers/JETIR1907G35.pdf

"An Experimental Investigation of Laser welding process parameter for Titanium Material", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp975-981, June 2019, Available at : http://www.jetir.org/papers/JETIR1907G35.pdf