• SHWETA SANJAY ADAYPRABHU
• Vishal Wankhade
• Dr. Pradeep Patil

Welding is widely used by metalworkers in fabrication, maintenance and repair of parts and structures. The arc welding process is a remarkably complex operation involving extremely high temperatures, which produce severe distortions and high levels of residual stresses. These extreme phenomena tend to reduce strength of the structure, which becomes vulnerable to fracture, buckling, corrosion and other type of failures. In gas shielded arc welding, an inert gas is used as a covering shield around the arc to prevent the atmosphere from the contaminating the weld. For the same Taguchi methods are applied to reform the objectives of the study. All these targets are achieved by making an experimental setup.

arc welding, fracture, buckling, inert gas, taguchi method.

"STUDY AND PARAMETRIC OPTIMIZATION OF GAS METAL ARC WELDING PROCESS (GMAW) PROCESS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.612-619, June 2019, Available :http://www.jetir.org/papers/JETIR1907J78.pdf

"STUDY AND PARAMETRIC OPTIMIZATION OF GAS METAL ARC WELDING PROCESS (GMAW) PROCESS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp612-619, June 2019, Available at : http://www.jetir.org/papers/JETIR1907J78.pdf