• Azeem sajad k k
• Niranjan V

composite wall is a form of construction with flat bar profiled steel sheets as the facing material with an infill concrete in between. Though the composite wall is intended for use a partition and shear walls in steel framed buildings, it has the potential to be used as structural elements in load bearing construction. In the present study, axial compression behaviour of the full scale wall panels of dimension 100x300x130 mm is to be studied. The research proposes a steel foam concrete composite (SFCC) panels made of thin profiled steel sheet of thickness 0.8 mm as the outer skins and aerated foam concrete (FC) of density 850 kg/m3 as the infill. The interaction between sheet and concrete is achieved by using through mild steel studs. The number of studs and the spacing between the studs are provided appropriately such that failure of the panel is by yielding of the steel sheets rather than buckling, which is the design criterion.

SFCC (steel foam concrete composite), axial compressiom,stud.

"EXPERIMENTAL INVESTIGATION AND NUMERICAL ANALYSIS OF STEEL FOAM CONCRETE COMPOSITE WALL PANELS UNDER AXIAL COMPRESSION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 9, page no.877-882, September-2020, Available :http://www.jetir.org/papers/JETIR2009117.pdf

"EXPERIMENTAL INVESTIGATION AND NUMERICAL ANALYSIS OF STEEL FOAM CONCRETE COMPOSITE WALL PANELS UNDER AXIAL COMPRESSION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 9, page no. pp877-882, September-2020, Available at : http://www.jetir.org/papers/JETIR2009117.pdf