• NADIPENNAGARI PEDDA VENKATESWARLU
• Dr.M.BALA THEJA
• M.SIVARAM KRISHNAIAH

A hub stream blower is one in which the stream enters the blower in a hub course (corresponding with the pivot of turn), and exits from the gas turbine, likewise in a hub bearing. The hub stream blower users combines the liquid by first adding the afterward diffusing it to get a weight increment. In a hub stream blower, air goes first with 1 stage then onto the following, second stage increasing the weight somewhat. The vitality amount of gas or air moving through it is expanded by the activity of the rotor cutting edges which apply a force on the liquid which is provided by an electric engine or a steam or a gas turbine. In this theory, a hub stream blower is planned and displayed in 3d demonstrating programming professional/engineer. The current plan has 30 cutting edges, in this proposal it is supplanted with 20 edges and 12 sharp edges. Material which is used present is steel of chromium; it is supplanted with titanium compound and nickel composite. Auxiliary investigation is done on the blower models to check the quality of the blower. Cfd investigation is done to confirm the progression of air.

DESIGN AND OPTIMIZATION OF AXIAL FLOW COMPRESSOR

"DESIGN AND OPTIMIZATION OF AXIAL FLOW COMPRESSOR ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 9, page no.520-525, September 2020, Available :http://www.jetir.org/papers/JETIR2009277.pdf

"DESIGN AND OPTIMIZATION OF AXIAL FLOW COMPRESSOR ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 9, page no. pp520-525, September 2020, Available at : http://www.jetir.org/papers/JETIR2009277.pdf